FANUC Series 21 i-TB 21i-TB FANUC Series 21 i-MB 21i-MB FANUC Series 21 Oi-TB 210i-TB FANUC Series 21 Oi-MB 210i-MB Series 21i Series 210i NOTE 1 For ease of explanation, the models may be classified as follows: T series: 21 i-TB/21 Oi-TB Mseries: 21i-MB/210i-MB 2 Some functions described in this manual may not be applied to some products. The Fanuc 21i Emulator is an add on option for both CNCBase and CNCMotion control software. The FANUC emulator replicates the FANUC 21i CNC controller. This controller and its subset, the FANUC 16i and 18i controllers, are the most popular controls used in industry to drive CNC industrial machines. Fanuc 21i Programmi ng Manual Marina Weber (2008) Repository Id: #5fd325ea646c9 Fanuc 21i Programming Manual Vol. XV Page 1/9 4347120. Dear Abby: Relatives pressed into manual labor by aunt who lives alone I realize she has no kids to take care of her, but I don't think I should be.
- Fanuc 21i T Parameter Manual
- Fanuc Series 21-t Manual
- Fanuc 21i-t Maintenance Manual
- Fanuc 21i-t Manual
- Fanuc 21i Control
EMCO WinNC GE Series Fanuc 21 TB programming G codes / M codes / Cycles complete lists.
G Codes
Fanuc 0i/0i Mate Fanuc 10/11/12 Fanuc Series 15 Fanuc 15i Fanuc 16i 18i Fanuc 21 Fanuc 21i Fanuc Alarms Fanuc Spindle Alarms Fanuc 6M 6T Alarms Mill Programming G68 Coordinate Rotation G72.1 Rotational Copy G72.2 Linear Copy G73 High Speed Drilling G74 Left-hand Tapping G76 Fine Boring Cycle G81. Fanuc 21i Programmi ng Manual Marina Weber (2008) Repository Id: #5fd325ea646c9 Fanuc 21i Programming Manual Vol. XV Page 1/9 4347120.
G Code | Description |
---|---|
G00 | Positioning (rapid traverse) |
G01 | Linear interpolation (feed) |
G02 | Circular interpolation clockwise |
G03 | Circular interpolation counterclockwise |
G04 | Dwell |
G7.1 | Cylindrical Interpolation |
G10 | Data setting |
G11 | Data setting Off |
G12.1 | Polar Coordinate Interpolation ON |
G13.1 | Polar Coordinate Interpolation OFF |
G17 | Plane selection XY |
G18 | Plane selection ZX |
G19 | Plane selection YZ |
G20 | Longitudinal turning cycle |
G21 | Thread cutting cycle |
G24 | Face turning cycle |
G28 | Return to reference point |
G33 | Thread cutting |
G40 | Cancel cutter radius compensation |
G41 | Cutter radius compensation left |
G42 | Cutter radius compensation right |
G70 | Inch data input |
G71 | Metric data input |
G72 | Finishing cycle |
G73 | Stock removal in turning |
G74 | Stock removal in facing |
G75 | Pattern repeating |
G76 | Deep hole drilling, cut-in cycle in Z |
G77 | Cut-in cycle in X |
G78 | Multiple threading cycle |
G80 | Cancel cycles (G83 up to G85) |
G83 | Drilling cycle |
G84 | Tapping cycle |
G85 | Reaming cycle |
G90 | Absolute programming |
G91 | Incremental programming |
G92 | Coordinate system setting, spindle speed limit |
G94 | Feed per minute |
G95 | Feed per revolution |
G96 | Constant cutting speed |
G97 | Direct spindle speed programming |
G98 | Return to initial plane |
G99 | Return to withdrawal plane |
M Codes
M Code | Description |
---|---|
M0 | Programmed stop |
M1 | Programmed stop. conditional |
M2 | Program end |
M3 | Spindle ON clockwise |
M4 | Spindle ON counterclockwise |
M5 | Spindle OFF |
M8 | Coolant ON |
M9 | Coolant OFF |
M13 | Driven tools ON clockwise |
M14 | Driven tools ON counterclockwise |
M15 | DRIVEN TOOLS OFF |
M20 | Quill FORWARD |
M21 | Quill BACKWARD |
M23 | Collecting tray BACKWARD |
M24 | Collecting tray FORWARD |
M25 | Clamping device OPEN |
M26 | Clamping device CLOSE |
M30 | Main program end |
M32 | Program end for loading operation |
M52 | Round axis operation (C-axis ON) |
M53 | Spindle operation (C-axis OFF) |
M57 | Spindle oscillate ON |
M58 | Spindle oscillate OFF |
M67 | Bar feed / loading magazine feed ON |
M68 | Bar feed / loading magazine feed OFF |
M69 | Bar change |
M71 | Blow-out ON |
M72 | Blow-out OFF |
M90 | Manual clamping chuck |
M91 | Tensile clamping device |
M92 | Pressure clamping device |
M93 | Final position monitoring OFF |
M94 | Bar feed / loading magazine activate |
M95 | Bar feed / loading magazine deactivate |
M98 | Subroutine call |
M99 | Subroutine end. jump command |
Addresses
Address | Description |
---|---|
O | program number 1 to 9499 for part programs and subroutines |
N | block number 1 to 9999 |
G | path function |
X, Z | position data in absolute values (X also dwell time) |
U, W | position data in incremental values (U also dwell time) |
R | radius, taper value, cycle parameter |
C | chamfer |
I, K | circle parameter |
F | feed rate, thread pitch |
S | spindle speed, cutting speed |
T | tool call (tool correction) |
M | miscellaneous function |
P | dwell, subprogram call, cycle parameter |
Q | cycle parameter |
; | block end |
![Fanuc 21i t parameter manual Fanuc 21i t parameter manual](/uploads/1/3/4/5/134528751/753884696.jpg)
Fanuc 21i Alarm Codes for CNC machinists.
Contents
- Fanuc 21i Alarms
Fanuc 21i Alarms
Program errors (P/S alarm)
Program errors /Alarms on program and operation (P/S alarm) Spongebob squarepants all seasons torrent download.
- 5066 RESTART ILLEGAL SEQUENCE NUMBER (M series) (Fanuc 21i Model A)
- 5110 IMPROPER G–CODE (G05.1 G1 MODE) (M series) (Fanuc 21i Model A)
- 5113 CAN NOT ERROR IN MDI MODE (G05.1) (M series) (Fanuc 21i Model A)
Background edit alarm
Fanuc 21i T Parameter Manual
BP/S alarm – BP/S alarm occurs in the same number as the P/S alarm that occurs in ordinary program edit. (070, 071, 072, 073, 074 085,086,087 etc.)
Absolute pulse coder (APC) alarms
Serial pulse coder (SPC) alarms
Servo Alarms
![Manual Manual](/uploads/1/3/4/5/134528751/396871719.jpg)